SA9500 rubber repair agent bag material, with a mixing ratio of 1:1, is made of polyurethane elastic material with rapid curing and high abrasion resistance. Through the cold vulcanization bonding system, it can realize the filling and repair of rubber damage and peeling on the surface of rubber products such as conveyor belt, incomplete internal structure of rubber, and the joint of rubber drum
instructions
1. Use a wallpaper knife to cut the edge of the torn or damaged belt into a "V" shape.
2. Grind the damaged part of the conveyor belt rough and clean it.
3. Cut it along the cutting line of the aluminum foil bag, take out the inner packaging bag and remove the middle black adhesive strip.
4. Rub the two ingredients in the inner packaging bag together, 3-4 minutes in summer and 4-5 minutes in winter.
Note: It is normal for the bag to get slightly hot after rubbing for 2 minutes.
5. After kneading, cut a corner of the packaging bag and squeeze it to the part to be repaired.
6. Use a scraper to scrape it flat. The surface of gel can be cleaned for 5 minutes, and it can run with light load for 60 minutes.